Peugeot 205 Front Suspension Kit – Wide with Tubular Subframe (ds)

A fully spherical jointed front suspension kit to fit the 205.

This version of the kit is supplied with our own fully triangulated tubular subframe for added strength and weight reduction. The wishbones are fabricated from CDS tube and are designed with race and rally in mind. We use refurbished 406 hubs along with new bearings so your original strut body will fit if required. We can supply coilover type 40mm inverted type strut bodies along with spring platforms and C-spanners at extra cost. The 406 hubs have revised roll-centre and bump steer correction via rod end spacers. The track rod ends are spherical jointed with the supplied screw on adaption tubes. Caster and camber is adjustable.
 
Available in a choice of track widths, ranging from plus 25mm up to full Maxi width.

Please note:
– The brake offset is slightly different from OE 205 on the 406 hub, it will be necessary to make some adjustments to your brake fitment.

– There is no provision to run the front ARB with this set-up.

– The steering rack seen in some of the attached photos is not included

– The subframe will be powder coated a dark anthracite grey (rather than the light grey in the photos.)